Honda S2000 Rear Suspension Drop Knuckle Kit
€3,400.00
excluding VAT
In stock
SKU
WFS21
Honda S2000 is a well designed car for enthusiast drivers. The car performs well on the streets and can be driven fast on a race track. If the focus is more towards performance, then the car will drive even better with lowered ride height, but then the factory designed kinematics won’t work as they are supposed to. Wisefab S2000 suspension kit brings the roll center, bump steer and camber gain back to normal range, providing better roll stiffness, better handling and grip.
We found other products you might need!
- Weight saving over original components
But still maintaining required strength and stiffness - Over 40mm lower A-arm joint drop compared to original knuckle
- 7075-T6 aluminium billet CNC knuckles and CrMo arms
With optimized double shear deasing that provides low weight and high strenght - CrMo rod ends and sphericals used instead of OEM style bushings.
- Easy camber adjustment on the knuckle
Camber can be adjusted easily on trackside in just a few minutes - Bump steer adjustment
Bump steer is adjustable by tie rod height on the knuckle - Quicker steering ratio
Steering ratio is slightly quicker compared to OEM
Kit includes:
- Upper and lower control arms
- Knuckles with hardware
- Lower control arms
- Assembeled tie rods
- Hardware for caster control
- AP1 and AP2 spacers
- Installation guide
Other information:
- This kit assumes coilovers
- Minimum rim size is 17“
- Track width is close to original. Similar size and offset rims can be used as with original suspension
- Original wheel speed sensor can be used
| Make | Honda |
|---|---|
| Field | Track |
| Placement | Rear |
| Prodmaster Name | Suspension Drop Knuckle Kit |
Spare parts
All
Complete parts
Left Knuckle
Right Knuckle
Left Suspension Arm #2
Right Suspension Arm #2
Suspension Arm #3
Left Suspension Arm #4
Right Suspension Arm #4
Suspension Arm #5
Complete parts
Complete parts
3
Suspension Arm #3
5
Suspension Arm #5
Left Knuckle
Left Knuckle
2
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
3
Washer Flat M12 ZN DIN125
4
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
6
Washer FlatSmall M10 ZN DIN433
7
Bolt Hex M10x1.5x 80 RH 10.9 ST DIN 931
8
Washer Flat M10 ZN DIN125
9
Camber Adjustment Plate
10
Bolt SetScrew M 8x1.25x 39.6 RH 10.9 ZN SPC
Right Knuckle
Right Knuckle
2
Bolt Hex M12x1.5x 70 RH 10.9 ST DIN 960
3
Washer Flat M12 ZN DIN125
4
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
6
Washer FlatSmall M10 ZN DIN433
7
Bolt Hex M10x1.5x 80 RH 10.9 ST DIN 931
8
Washer Flat M10 ZN DIN125
9
Camber Adjustment Plate
10
Bolt SetScrew M 8x1.25x 39.6 RH 10.9 ZN SPC
Left Suspension Arm #2
Left Suspension Arm #2
2
Spacer ID14 OD16 h10
3
Rod end 16x1.5 RH male CrMo
4
Spacer ID14 OD16 h19
5
Double Adjuster Female/Male M16x1.5 M22x1.5
6
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
7
Bolt Hex M12x1.5x 50 RH 10.9 ST DIN 961
8
Washer Flat M12 ZN DIN125
9
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
10
Spacer ID12 OD16 h14.5
11
Spherical ID16/OD32
12
C-Clip InternalSTD d32 ST DIN472
13
Spacer ID12 OD16 h 9.5
Right Suspension Arm #2
Right Suspension Arm #2
2
Spacer ID14 OD16 h10
3
Rod end 16x1.5 RH male CrMo
4
Spacer ID14 OD16 h19
5
Double Adjuster Female/Male M16x1.5 M22x1.5
6
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
7
Bolt Hex M12x1.5x 50 RH 10.9 ST DIN 961
8
Washer Flat M12 ZN DIN125
9
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
10
Spacer ID12 OD16 h14.5
11
Spherical ID16/OD32
12
C-Clip InternalSTD d32 ST DIN472
13
Spacer ID12 OD16 h 9.5
Suspension Arm #3
Suspension Arm #3
2
Spacer ID12 OD16 h18
3
Spacer ID12 OD16 h 9.5
4
Rod end 16x1.5 RH male CrMo
5
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
6
Spacer ID10 OD12 h14
7
C-Clip InternalSTD d26 ST DIN472
8
Spherical ID12/OD26
Left Suspension Arm #4
Left Suspension Arm #4
2
Spacer ID12 OD16 h20.75
3
Rod end 16x1.5 RH male CrMo
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
Right Suspension Arm #4
Right Suspension Arm #4
2
Spacer ID12 OD16 h20.75
3
Rod end 16x1.5 RH male CrMo
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
Suspension Arm #5
Suspension Arm #5
2
Spacer ID14 OD16 h11.5
3
Rod end 16x1.5 RH male CrMo
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
5
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
6
Spacer ID10 OD14 h15.5
7
Rod end 14x1.5 LH male CrMo
"The change of the entire suspension geometry can now be adjusted precisely at the track. When driving the car the feeling is so honest and direct. As a driver, you understand even better how the car is behaving. "
"The car feels much more direct and the lowered center of gravity gives higher cornering speeds. The weight savings and the optimized geometry is important for breaking track records."
""The feedback is improved and the driving behavior is much more precise. The confidence in the car has improves greatly. These parts are meant for racing. Wisefab is racing!""
"The first thing that I noticed after the installation of our Wisefab package was how much sharper the car became. It was so much better right out of the box we immediately dropped lap times just by bolting on the kit using our existing setup."
