Honda S2000 Front Suspension Drop Knuckle Kit
€3,400.00
excluding VAT
In stock
SKU
WFS22
Honda S2000 is a well designed car for enthusiast drivers. The car performs well on the streets and can be driven fast on a race track. If the focus is more towards performance, then the car will drive even better with lowered ride height, but then the factory designed kinematics won’t work as they are supposed to. Wisefab S2000 suspension kit brings the roll center, bump steer and camber gain back to normal range, providing better roll stiffness, better handling and grip.
We found other products you might need!
- Weight saving over original components
But still maintaining required strength and stiffness - Over 40mm lower A-arm joint drop compare to original knuckle
- 7075-T6 aluminium billet CNC knuckles and CrMo arms
With optimized double shear deasing that provides low weight and high strenght - CrMo rod ends and sphericals used instead of OEM style bushings.
- Easy camber adjustment on the knuckle
Camber can be adjusted easily on trackside in just a few minutes - Bump steer adjustment
Bump steer is adjustable by tie rod height on the knuckle - Quicker steering ratio
Steering ratio is slightly quicker compared to OEM
Kit includes:
- Upper and lower control arms
- Knuckles with hardware
- Lower control arms
- Assembeled tie rods
- Hardware for caster control
- Installation guide
Other information:
- This kit assumes coilovers
- Minimum rim size is 17“
- Track width is close to original. Similar size and offset rims can be used as with original suspension
- Original wheel speed sensor can be used
| Make | Honda |
|---|---|
| Field | Track |
| Placement | Front |
| Prodmaster Name | Suspension Drop Knuckle Kit |
Spare parts
All
Complete parts
Left Knuckle
Right Knuckle
Left Lower Control Arm
Right Lower Control Arm
Upper Control Arm
Tie Rod Assembly
Adjustment Sticker
Complete parts
Complete parts
3
Upper Control Arm
4
Tie Rod Assembly
5
Adjustment Sticker
Left Knuckle
Left Knuckle
2
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
3
Washer Flat M12 ZN DIN125
4
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
6
Washer Flat M10 ZN DIN125
7
Camber Adjustment Plate
8
Bolt SetScrew M 8x1.25x 39.6 RH 10.9 ZN SPC
9
Washer FlatSmall M10 ZN DIN433
10
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
11
Bolt Hex M10x1.5x 80 RH 10.9 ST DIN 931
12
Washer ID10 OD24.5 h 1
13
Washer ID10 OD24.5 h 2
Right Knuckle
Right Knuckle
2
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
3
Washer Flat M12 ZN DIN125
4
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
5
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
6
Washer Flat M10 ZN DIN125
7
Camber Adjustment Plate
8
Bolt SetScrew M 8x1.25x 39.6 RH 10.9 ZN SPC
9
Washer FlatSmall M10 ZN DIN433
10
Bolt Hex M10x1.5x 90 RH 10.9 ST DIN 931
11
Bolt Hex M10x1.5x 80 RH 10.9 ST DIN 931
12
Washer ID10 OD24.5 h 1
13
Washer ID10 OD24.5 h 2
Left Lower Control Arm
Left Lower Control Arm
2
Bolt Hex M14x1.50x100 RH 10.9 ZN SPC
3
Washer Flat M14 ZN DIN125
4
Control Arm Adjustment Washer
5
Spacer ID14 OD16 h23
6
Rod end 16x1.5 RH male CrMo
7
Nut Nylock M14x1.5 RH 8.8 ZN DIN985-8
8
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
9
Spacer ID14 OD16 h21
10
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
11
Washer Flat M10 ZN DIN125
12
Lower Control Arm Mount
14
Spacer ID12 OD16 h14.5
15
C-Clip InternalSTD d32 ST DIN472
16
Spherical ID16/OD32
Right Lower Control Arm
Right Lower Control Arm
2
Bolt Hex M14x1.50x100 RH 10.9 ZN SPC
3
Washer Flat M14 ZN DIN125
4
Control Arm Adjustment Washer
5
Spacer ID14 OD16 h23
6
Rod end 16x1.5 RH male CrMo
7
Nut Nylock M14x1.5 RH 8.8 ZN DIN985-8
8
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
9
Spacer ID14 OD16 h21
10
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
11
Washer Flat M10 ZN DIN125
12
Lower Control Arm Mount
14
Spacer ID12 OD16 h14.5
15
C-Clip InternalSTD d32 ST DIN472
16
Spherical ID16/OD32
Upper Control Arm
Upper Control Arm
2
Spacer ID12 OD16 h 9.5
3
Rod end 16x1.5 RH male CrMo
4
Spacer ID12 OD16 h16.5
5
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
6
Spacer ID10 OD12 h17
7
C-Clip InternalSTD d26 ST DIN472
8
Spherical ID12/OD26
Tie Rod Assembly
Tie Rod Assembly
2
Tie Rod Inner M14x1.5 M16x1.5 L278
3
Spacer ID10 OD14 h13
4
Rod end 14x1.5 RH female CrMo
"The change of the entire suspension geometry can now be adjusted precisely at the track. When driving the car the feeling is so honest and direct. As a driver, you understand even better how the car is behaving. "
"The car feels much more direct and the lowered center of gravity gives higher cornering speeds. The weight savings and the optimized geometry is important for breaking track records."
""The feedback is improved and the driving behavior is much more precise. The confidence in the car has improves greatly. These parts are meant for racing. Wisefab is racing!""
"The first thing that I noticed after the installation of our Wisefab package was how much sharper the car became. It was so much better right out of the box we immediately dropped lap times just by bolting on the kit using our existing setup."
