BMW F80 F82 F87 Rear Suspension Drop Knuckle Kit
€2,100.00
excluding VAT
In stock
SKU
WF801
Wisefab BMW F8X rear suspension kit can be fitted on a variousf BMW M-models such as F80, F82; F87. All the metal components on F8X rear suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. Also for weight reduction and stiffness purposes all the suspension links are designed straight and tubular or boxed type. Rod ends and spherical bearings used, no rubber bushings.
PS! This rear kit can be used only with "true" style one-piece rear coilovers.
We found other products you might need!
- Revised kinematics, not just dropped knuckle.
If the focus is more towards performance, then the car can act better with lowered ride height, but then the factory designed kinematics wouldn't work as it supposed to. The kit would give a good kinematics with lowered car - higher roll center, , revised cambergain, anti-squat and bumpsteer for maximum grip. - Easy camber adjustment.
As the top links are straight tubular type, then camber can be adjusted simply by changing their length. - Bump steer adjustment.
Possibility to adjust bump steer by changing rod end location in a slot. - Anti-squat adjustment possibility.
Possibility to adjust anti-squat by changing the top forward link height on upright. It can be done in less than 10 minutes at the trackside. Lowering link would increase anti-squat, raising it would decrease anti-squat. - Original wheelspeed sensor (ABS sensor) can be used.
- Only takes either M model or 336mm or bigger brake discs.
Smaller brakes will not fit. - Wheel bearing size should be 45x85x41
Kit includes:
- Pre-set suspension links.
- Uprights with hardware.
- Subframe bushings with sperical bearings.
Other components
- Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
- This kit assumes lower (shorter) springs or coilovers to lower the car.
- Possibility to use bigger CV-axles
Minimum rim size is 17"
| Make | BMW |
|---|---|
| Field | Drift |
| Placement | Rear |
| Prodmaster Name | Suspension Drop Knuckle Kit |
Spare parts
All
Complete parts
Left Knuckle
Right Knuckle
Suspension Arm #4
Complete parts
Complete parts
4
Suspension Arm #4
Left Knuckle
Left Knuckle
2
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
3
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
4
Washer Flat M12 ZN DIN125
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
6
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
8
Washer Flat M10 ZN DIN125
9
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
11
Bolt Hex M10x1.5x 45 RH 10.9 ST DIN 931
13
Brake Adapter
14
Pin Spring 6x10 Normal ST DIN1481
15
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
16
Washer Flat M 8 ZN DIN125
17
Bolt Hex M 8x1.25x 45 RH 8.8 ZN DIN 931
Right Knuckle
Right Knuckle
2
Bolt Hex M10x1.5x 35 RH 10.9 ST DIN 933
3
Bolt Hex M12x1.5x 80 RH 10.9 ST DIN 960
4
Washer Flat M12 ZN DIN125
5
Nut Nylock M12x1.5 RH 8.8 ZN DIN985-8
6
Bolt Hex M10x1.5x 60 RH 10.9 ST DIN 931
7
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
8
Washer Flat M10 ZN DIN125
9
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
11
Bolt Hex M10x1.5x 45 RH 10.9 ST DIN 931
13
Brake Adapter
14
Pin Spring 6x10 Normal ST DIN1481
15
Nut Nylock M 8x1.25 RH 8.8 ZN DIN985-8
16
Washer Flat M 8 ZN DIN125
17
Bolt Hex M 8x1.25x 45 RH 8.8 ZN DIN 931
Suspension Arm #4
Suspension Arm #4
2
Spacer ID12 OD14 h14
3
Rod end 14x1.5 LH male CrMo
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
6
Spacer ID10 OD12 h 7
7
Rod end 12x1.5 RH male CrMo
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"
