Toyota GT86 Rear Suspension Drop Knuckle Kit
€2,650.00
excluding VAT
In stock
SKU
WF861
The Toyota GT86 is a well-designed car for enthusiast drivers. The car performs well on the streets and can be driven fast on a racetrack. If the focus is more towards on performance, then the car will drive even better with lowered ride height, but then the factory-designed kinematics won’t work as they are supposed to. Wisefab GT86 suspension kit brings the roll center, bump steer, anti-squat, and camber curve back to normal range, providing better roll stiffness, handling, and grip.
Be sure to check out the lock kits for Toyota GT86:
Toyota GT86 Front Drift Angle Lock Kit RHD (Right-hand drive version)
Toyota GT86 Front Drift Angle Lock Kit LHD (Left hand drive version)
Toyota GT86 Front Lock Kit with Lexus IS steering rack relocation version
Scroll down to order the spare parts for your Toyota GT86 suspension kit conveniently right here!
- -7 kg of combined weight saving over original components
But still maintaining required strength and stiffness - 7075-T6 aluminium billet CNC knuckles
With optimized double shear design that provides low weight and high strenght - All the rear links and arms are made of high strength steel
CrMo rod ends and sphericals used instead of rubber bushings - Adjustable shock motion ratio
Shock motion ratio can be adjusted by changing the shocks position on the arm. It can be done quickly and has the effect of changing the springrate. This means that understeer or oversteer can be removed within a few minutes - Easy camber adjustment
Camber shims are used for adjustment - Bump steer adjustment
Possibility to adjust bumpsteer by changing washer locations
Kit includes:
- Pre-set suspension arms
- Knuckles with hardware
- Camber adjustment shims
- Installation guide
Other information:
- Track is the same as original, as this is defined by halfshaft lengths
- This kit assumes coilovers
- Original wheel speed sensor can be used
- Possibility to use Nissan S-Chassis hub with bigger CV joint
- Minimum rim size is 17“
| Make | Toyota |
|---|---|
| Field | Drift |
| Placement | Rear |
| Prodmaster Name | Suspension Drop Knuckle Kit |
Spare parts
All
Complete parts
Left Knuckle
Right Knuckle
Suspension Arm #2
Right Suspension Arm #3
Left Suspension Arm #3
Suspension Arm #4
Suspension Arm #5
Complete parts
Complete parts
2
Suspension Arm #2
3
Suspension Arm #3
4
Suspension Arm #4
5
Suspension Arm #5
Left Knuckle
Left Knuckle
2
Knuckle Clevis
3
Hub Spacer Plate
5
Washer FlatSmall M10 ZN DIN433
6
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
7
Bolt Allen M 8x1.25x 30 RH 12.9 ST DIN 912
8
Washer Flat M 8 ZN DIN125
9
Camber Adjustment Shim 1mm
10
Camber Adjustment Shim 2mm
11
Camber Adjustment Shim 3mm
12
Bolt Hex M12x1.5x 60 RH 10.9 ST DIN 960
13
Washer FlatSmall M12 ZN DIN433
14
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
15
Washer ID10 OD24.5 h 1
16
Washer ID10 OD24.5 h 2
18
Bolt Allen M 8x1.25x 25 RH 12.9 ST DIN 912
Right Knuckle
Right Knuckle
2
Knuckle Clevis
3
Hub Spacer Plate
5
Washer FlatSmall M10 ZN DIN433
6
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
7
Bolt Allen M 8x1.25x 30 RH 12.9 ST DIN 912
8
Washer Flat M 8 ZN DIN125
9
Camber Adjustment Shim 1mm
10
Camber Adjustment Shim 2mm
11
Camber Adjustment Shim 3mm
12
Bolt Hex M12x1.5x 60 RH 10.9 ST DIN 960
13
Washer FlatSmall M12 ZN DIN433
14
Bolt Hex M10x1.5x 70 RH 10.9 ST DIN 931
15
Washer ID10 OD24.5 h 1
16
Washer ID10 OD24.5 h 2
18
Bolt Allen M 8x1.25x 25 RH 12.9 ST DIN 912
Suspension Arm #2
Suspension Arm #2
2
Spacer ID12 OD16 h10
3
Rod end 16x1.5 RH male CrMo
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
5
C-Clip InternalSTD d32 ST DIN472
6
Spherical ID16/OD32
Right Suspension Arm #3
Right Suspension Arm #3
2
Spacer ID12 OD16 h19
3
Spherical ID16/OD32
4
C-Clip InternalSTD d32 ST DIN472
5
Spacer ID12 OD16 h14.5
6
Spacer ID10 OD12 h10.5
7
C-Clip InternalSTD d26 ST DIN472
8
Spherical ID12/OD26
Left Suspension Arm #3
Left Suspension Arm #3
2
Spacer ID12 OD16 h19
3
Spherical ID16/OD32
4
C-Clip InternalSTD d32 ST DIN472
5
Spacer ID12 OD16 h14.5
6
Spacer ID10 OD12 h10.5
7
C-Clip InternalSTD d26 ST DIN472
8
Spherical ID12/OD26
Suspension Arm #4
Suspension Arm #4
2
Spacer ID12 OD16 h13.5
3
C-Clip InternalSTD d32 ST DIN472
4
Spherical ID16/OD32
5
Spacer ID10 OD14 h 9
6
Rod end 14x1.5 LH male CrMo
7
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
Suspension Arm #5
Suspension Arm #5
2
Spacer ID14 OD16 h10
3
Rod end 16x1.5 RH male CrMo
4
Nut Thin M16x1.5 RH 8.8 ZN DIN936/439
5
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
6
Spacer ID10 OD14 h 5.4
7
Rod end 14x1.5 LH male CrMo
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"
