Mazda RX-8 Rear Suspension Drop Knuckle Kit
€2,000.00
excluding VAT
In stock
SKU
WFR81
Rear suspension kit for Mazda RX8 and this kit is also suitable for the MX5(NC 2005-2015). Wisefab has revised all the kinematics and built a complite new knuckle for the RX8. Higher rollcenter and less camber gain. Adjustable anti squat and bumpsteer to ensure the best sideways performance for your driftcar.
To complite your suspension upgrade be sure to check out the Lock kit for Mazda RX8!
- Suitable for Mazda RX8 and MX5 NC (2005 – 2015)
- Revised kinematics, not just dropped knuckle
- Higher rollcenter, revised camber gain.
Mazda RX8 rear suspension kit will provide good kinematics with lowered car, adjustable antisquat and bumpsteer for maximum grip - Anti-squat adjustment
Possibility to adjust anti-squat by changing top forward link height on upright - Bump steer adjustment
Possibility to adjust bump steer by changing rod end location in the slots - Slightly lighter than original aluminium suspension
All the metal components on RX8 rear suspension are from high strenght steel, including sheetmetal components, tubes, tube ends and rod end housings. For weight reduction and stiffness purposes all the suspension links are tubular straight design. CrMo 3-piece design rod ends and spherical bearings used, no rubber bushings - Clearance for up to 110mm CV joint
Kit includes:
- Pre-set suspension links
- Uprights with hardware
- Installation guide
Other information
- Hub to hub length (track) is the same as original, as this is defined by halfshaft length
- Knuckles have dual caliper setup
- This kit assumes coilovers to adjust ride height
- Minimum rim size is 17"
| Make | Mazda |
|---|---|
| Field | Drift |
| Placement | Rear |
| Prodmaster Name | Suspension Drop Knuckle Kit |
Spare parts
All
Complete parts
Left Knuckle
Right Knuckle
Suspension Arm #2
Suspension Arm #3
Suspension Arm #4
Suspension Arm #5
Suspension Arm #6
Complete parts
Complete parts
2
Suspension Arm #2
3
Suspension Arm #3
4
Suspension Arm #4
5
Suspension Arm #5
6
Suspension Arm #6
Left Knuckle
Left Knuckle
2
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
3
Washer FlatSmall M10 ZN DIN433
4
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
5
Nut Hex Flange M10x1.5 RH 8.8 ZN
6
Bolt Hex M10x1.5x100 RH 10.9 ST DIN 931
7
BushingT ID10 OD24 h10
Right Knuckle
Right Knuckle
2
Bolt Hex M10x1.5x 55 RH 10.9 ST DIN 931
3
Washer FlatSmall M10 ZN DIN433
4
Nut Nylock M10x1.5 RH 8.8 ZN DIN985-8
5
Nut Hex Flange M10x1.5 RH 8.8 ZN
6
Bolt Hex M10x1.5x100 RH 10.9 ST DIN 931
7
BushingT ID10 OD24 h10
Suspension Arm #2
Suspension Arm #2
2
Spacer ID14 OD16 h19
3
Rod end 16x1.5 RH male CrMo
4
Double Adjuster Female/Male M16x1.5 M22x1.5
5
Bolt Hex M 8x1.25x 25 RH 12.9 ST DIN 933
6
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
7
Rod end 14x1.5 LH male CrMo
8
Spacer ID10 OD14 h 5.4
Suspension Arm #3
Suspension Arm #3
2
Spacer ID12 OD14 h14
3
Rod end 14x1.5 LH male CrMo
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
6
Spacer ID10 OD12 h10.5
7
Rod end 12x1.5 RH male CrMo
Suspension Arm #4
Suspension Arm #4
2
Spacer ID12 OD14 h18
3
Rod end 14x1.5 LH male CrMo
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
6
Spacer ID10 OD12 h 7
7
Rod end 12x1.5 RH male CrMo
Suspension Arm #5
Suspension Arm #5
2
Spacer ID12 OD14 h14
3
Rod end 14x1.5 LH male CrMo
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
6
Spacer ID10 OD12 h 7
7
Rod end 12x1.5 RH male CrMo
Suspension Arm #6
Suspension Arm #6
2
Spacer ID12 OD14 h14
3
Rod end 14x1.5 LH male CrMo
4
Nut Thin M14x1.5 LH 8.8 ZN DIN936/439
5
Nut Thin M12x1.5 RH 8.8 ZN DIN936/439
6
Spacer ID10 OD12 h 7
7
Rod end 12x1.5 RH male CrMo
"’We started working together with Wisefab back in 2014 when we launched our Falken Tyres Nissan 240sx for European competition. Since then, we have enjoyed working closely with the engineers at Wisefab testing new products before going into production and have had a lot of success winning multiple championship worldwide. Thank you to everyone at Wisefab for believing in us and producing such top-quality products."
“When I first installed a Wisefab lock kit it truly opened the door for some more aggressive driving style. I quickly began to expect nothing less than the massive angle and performance that Wisefab provides and installed a lock kit on all (4) of my Nissan 240sx that I currently drift. Also, after testing what I though was a very competitive rear suspension solution against the latest Wisefab rear kit, I was blown away with the apparent grip gain the rear Wisefab kit yielded. I am so thankful that Wisefab has poured so much effort into creating a bolt on suspension solution that transforms a Nissan 240sx into what I believe is still the most competitive drift chassis in the world."
"I love the Wisefab suspension kits used on my competition and demo vehicles, they provide all the angle and grip we love along with the strength and durability we need to compete with the best!"
"I wouldn't have half the results! Only by running Wisefab in my Toyota 86 it just makes the car handle so good and let's me adjust set up pretty easy which is a massive help going from track to track!"
